| Customization: | Available |
|---|---|
| Additional Capabilities: | Vacuum, Mixing |
| Application: | Liquid, Liquid with Suspended Solids, Powder, Viscous Fluid |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main Configuration: Equipped with cutting-edge technology, our mixing tank boasts a robust stainless steel construction, enhanced with advanced PLC (Programmable Logic Controller) systems. This premium setup guarantees efficient mixing operations, exceptional durability, and unrivaled control over the dissolving process, aligning perfectly with the high standards of modern manufacturing.
| No. | Item | Configuration |
| 1 | Equipment appearance | A3 Paint,International warm grey color 1C |
| 2 | Three phase asynchronous VFD | Standard configuration |
| 3 | Motor VVVF | Standard configuration |
| 4 | Lift mechanism | Optional |
| 5 | Upper and lower liquid level detection | Optional |
| Note: If there are special requirements or additional/reduced items (such as adding/reducing pipe openings), please provide additional explanations. The main switch power cord of the equipment inlet box and the hot and cold water pipes connected to the mixing tank interface can be prepared by the customer themselves. | ||
Working Principle and Relevant Parameters: At the core of our design is a sophisticated working principle that ensures flawless dissolving and mixing operations. The integration of PLC control enhances operational accuracy, offering a seamless blend of technology and engineering expertise. Every aspect, from temperature control to mixing speed, is finely tuned to deliver exceptional results.
| Usage | This model is mainly suitable for pre mixing solvents such as PVDF and NMP |
| Working principle | The power on signal is given through the control panel, and the mixing head of the premix tank is operated at the set speed. The mixing head of the premix tank is composed of a transmission part connected by three sets of motors on the barrel cover, which drives a set of low-speed mixing blades under the barrel cover and two sets of high-speed dispersers to operate. The mixing paddles and dispersers rotate independently in the mixing tank, and the mixing and power are driven by different motors, which can achieve independent stepless speed regulation. |
| Equipment Composition | Transmission part, sealed container, control system, etc |
| External dimension | 1000mm x930mm x 1900 mm (L x W x H) |
| Tank specification | Internal diameter φ700mm depth 400mm |
| Design capacity | 265L |
| Efficient usage capacity | 200L |
| Mixing paddle speed | 0-40 rpm, VVVF |
| Disperse disk speed | 0-1400 rpm, VVVF |
| Mixing power | 4 KW |
| Dispersing power | 2.2 KW (Two groups 3KW) |
| Weight | About 0.85 ton |
| Item | Capacity |
| Applicable viscosity | Viscosity ≤100Kcps |
| Applicable solvent | NMP, deionized water, etc |
| Applicable additive | SBR,CNT,etc. |
| Applicable powder | PVDF,CMC |
| Failure rate | ≤2%, |
| Bearing temperature | 7ºC~80ºC,Customer is required to provide circulating hot and cold water |
| Measuring accuracy | ±2ºC,Customer is required to provide circulating hot and cold water |
| Inner barrel pressure resistance | Long term water pressure ≤ 0.3Mpa, no deformation or leakage phenomenon |
| Not applicable | Acetone solvent |
){kind=link}